Myphone Q21 duo package comes with a mini CD containing the PCSuite and a USB driver. There is no ‘actual’ installation involved when using the Myphone q21 duo PCSuite, just copy all the files to your computer and you are all set.
How to connect your myphone Q21 to your PC?
- On idle screen, plug in your phone to your PC using the provided USB cable.
- Phone: you will be asked for the USB configuration, just select ‘COM PORT’
- Install the USB Cable driver on your PC (also provided in the CD)
- PC: Go to Control Panel – > Device Manager
- Check entry for ‘Ports (Com and LPT1), USB Modem Driver (COM<n>). Take note of the Communication port specified (e.g. COM13).
- Run Phone suite application.
- Go to Settings. On the General Tab, select mobile phone type (176×220 or 220×176 doesn’t matter I think). Then, select the COM port defined in the device manager.
- Go to Create Connection Tab. Click the [Create] button. Modem in Com Port 13 should be added in the list.
- PhoneSuite should then be able to connect with your phone and the message ‘Connected’ should be displayed at the lower right corner of your screen.
- If not, disconnect the USB cable and reconnect.
- Done. Pardon for some grammatical errors and cluttered display, this is a quick post
meron na bang pc suite sa qtv20? – thanks
thnx! laking tulong neto! ehehehe
pwede pashare ng files? down kc yta ung website ng myphone
will upload the files here.. i’ll try this weekend..
where can I find a free download for myphone tv21 pc suite software?
Sana, pede rin xa s QTV 80 Duo ko… Kaso, nde eh…
Parang nde compatible ung Suite s model ng phone q…
I believe nakasulat po dun ung mga compatible phones
Oo nga eh…
Late q n kc nabasa…
Sna, mg-release n cla ng suite na compatible dun s ibang units…
preho dn b ng procedure ung pra s qt22 duo?kung hindi pwde rn b mkta ung settings pra dn po s cell q..tnx
i think pareho lang din po..
pareho din ba ang procedure sa qt23 duo?
why cant i used it on my Q22.???
hay buti na lang nakita ko ito, maraming salamat po sa post mo. naging malaking tulong ito para sa akin.
hi, did what was instructed above, after the phonesuite read the contents of the phone, a message pops up saying “Fail read advanced information”. it can still see my contacts list but only the first cellphone number. if i had a contact that had a home number, office number, email, etc., the phonesuite wouldn’t be able to see it.
as for the messages its working great. but for the multi media like photos, melodies, mms, and file manager, same message “Fail read advanced information”. any ideas? i have yet to try using it as a modem.
thanks and more power